RL 10ZV1

SANKEN ELECTRIC CO., LTD. RL10Z 1. Scope The present specifications shall apply to Sanken silicon rectifier diode, RL10Z. 2. Outline Type Silicon Rectifier Diode (Planar type) Structure Resin Molded Applications High Frequency Rectification, etc. 3. Flammability UL94V-0 (equipment) Item Symbol Unit Rating Transient Peak Reverse Voltage VRSM V 200 2 Peak Reverse Voltage VRM V 200 3 Average Forward Current IF (AV) A 2.0 IFSM A A2s I2t Limiting Value I2t 6 Junction Temperature Tj 7 Storage Temperature Tstg No. ew d ℃ de ℃ en m Item m 5. Electrical characteristics fo 5 rN Peak Surge Forward Current 4 D 1 Conditions es ig No. ns 4. Absolute maximum ratings 30 4.5 Refer to Derating of .7 10ms. Sine wave, one shot 1msec≦t≦10msec -40～+150 -40～+150 Ta=25℃、unless otherwise specified Symbol Unit Value Conditions Forward Voltage Drop VF V 0.98 max. IF = 2.0A 2 Reverse Leakage Current IR μA 50 max. VR=VRM 3 Reverse Leakage Current Under High Temperature HIR μA 100 max. VR=VRM, Ta=100℃ trr-1 ns 50 max. IF=IRP=100mA, 90% Recovery point trr-2 ns 35 max. θj-l ℃/W 15max. N ot R ec o 1 4 5 Reverse Recovery Time Thermal Resistance IF=100mA,IRP=200mA,75% Recovery point Between Junction and Lead 6. Characteristics IF(AV) － PF 041207 SSA-04584 1／5 61426-01 SANKEN ELECTRIC CO., LTD. RL10Z 3.0 3.5 Tj=150℃ 3.0 t Forward Power Dissipation (W) T t/T=1/6 2.0 2.5 PF (W) t/T=1/3,Sinewave 2.0 1.5 1.0 t/T=1/2 D.C ns 1.0 0.0 es ig 0.0 1.0 0.0 80 D IF(AV) (A) 2.0 0.5 ew Average Forward Current (A) rN 7. Derating fo Tl － IF(AV) t/T=1/2 d 2.0 de m en D.C t/T=1/3,Sinewave ec o m 1.0 R Tj=150℃ t T ot IF(AV) [A] Average Rectified Forward Current t/T=1/6 N 0.0 80 90 100 110 120 130 140 150 Tl （℃） Lead Temperature 041207 SSA-04584 2／5 61426-01 90 SANKEN ELECTRIC CO., LTD. RL10Z 8. Package information 8.1 Dimensions 62.5±0.7 7.2±0.2 ※2 φ 0.78±0.05 Φ 4.0±0.2 ※3 ※1 Dimensions in mm D ew 8.2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. The color of the case will be black. es ig ns ※1 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) ※2 The centric allowance of lead wire against center of physical body is 0.3mm(max.) ※3 The burr may exit up to 2mm from the body of lead rN ① Type number RL10Z fo ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. de d カソード表示 Cathode Band ③ ② en ③ R ec o m ② ① m ① ③ Lot number 2 (ten days) ･： Top of the month ･･： Middle of month ･･･： End of month ot Internal structure diagram and material list No. ① ② ③ N 9. Materials Plastic body Epoxy Resin Chip Silicon Leads Solder Dipped Silver plated copper wire Name of part @ ‡A ‡B ‡ Weight of products: Approx.0.44g 041207 SSA-04584 3／5 61426-01 SANKEN ELECTRIC CO., LTD. Reliability 10.1 Test Conditions No. 1 Item Rating Thermal Fatigue Test Conditions 5000 cycles ⊿Tj=100℃ 2 High Temperature Reverse Bias Test 1000 hours Ta=150℃, 3 Humidity Reverse Bias Test 500 hours Ta=85℃, 4 High Temperature Storage Test 1000 hours Ta=150℃ 1000 hours Ta=85℃, VR=VRM (Half sine wave) RH.=85%, VR=VRM×0.8 (D.C.) 5 Moisture Resistance Test 6 Thermal Shock Test 100 cycle Ice-water(5min.) ~ R.T.(30sec.) ~ Boiling-water(5min.) 7 Temperature Cycle Test 100 cycle -40℃(30min.) ~ R.T(5min.) ~ +150℃(30min.) 8 Pressure Cooker Test 9 Resistance to Soldering Heat Test ns es ig D 48 hours R.H.=85% 2.03×105Pa, 100%R.H., Unsaturated equipment ew 10. RL10Z rN 10 sec. 260±5℃, Dipping up to 1.5mm form case Solderability Test 11 Lead Bend Test 12 Lead Pull Test 13 Lead Twist Test 14 Drop Test 95% 245±5℃, 5±0.5sec.,Using rosin flux d 10 380±5℃, Using soldering iron fo 3.5 sec. 10 sec. Apply EIAJ ED-4701/400 2 times 10 times Naturally drop from 1m height on maple plate ec o m m en de 2 cycles N ot R 10.2 Acceptance Criteria (1)Item No.1~9 The product shall meet the electrical specifications in paragraph 5 satisfy 1 and 2 after being exposed to normal temperature for less than 24 hours in 2 hours or more (2)Item No.10 The product shall meet the rating. (3)Item No.11~14 There shall be no trouble in testing and the electrical characteristics in paragraph 5 satisfy 1 and 2. 11. Standard Test Condition Standard test conditions are at Ta=25℃ and R.H.=60%. But it is also acceptable to do test underordinary temperature and ordinary R.H. (Ta=5～35℃，R.H.=45～85%) 041207 SSA-04584 4／5 61426-01 SANKEN ELECTRIC CO., LTD. RL10Z 12. Caution and warning ！ △ CAUTION/ WARNING Application and operation examples described in this document are quoted for the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights or any other rights of Sanken or any third party which may result from its use. ● When using the products herein, the applicability and suitability of such products for the intended purpose object shall be reviewed at the users responsibility. ● Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death, fires or damages to the society due to device failure or malfunction. ● Sanken products listed in this document are designed and intended for the use as components in general purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Please return to us this document with your signature(s) or seal(s) prior to the use of the products herein. When considering the use of Sanken products in the applications where higher reliability is required (traffic signal control systems o equipment, fire/crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss, and then return to us this document with your signature(s) or seal(s) prior to the use of the products herein. The use of Sanken products without the written consent of Sanken in the applications where extremely high reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly prohibited. ● Anti radioactive ray design is not considered for the products listed herein. N ot R ec o m m en de d fo rN ew D es ig ns ● 041207 SSA-04584 5／5 61426-01